View E3F2-7C4-P1_3532593.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

m18 cylindrical photoelectric e3f2 threaded cylindrical m18 size sensors with built-in amplifier rugged stainless and nickel plated brass versions chemical resistant, abs resin case type polarized models compact and space-saving long detection distance (7 m) dc switching types with connectors for easy maintenance wide operating voltage range (10 to 30 vdc, or 24 to 240 vac) short-circuit and reverse connection protection (dc switching type) ul, csa listed and ce marked ordering information sensors supply type connection output range housing part number ac through-beam pre-leaded light-on 3 m plastic e3f2-3z1 g dark-on plastic e3f2-3z2 retroreflective, nlid light-on 2 m plastic e3f2-r2z1 , non-polarized dark-on plastic e3f2-r2z2 diffuse light-on 100 mm plastic e3f2-ds10z1n dark-on plastic e3f2-ds10z2n dc through-beam connector npn 7 m plastic E3F2-7C4-P1 g npb e3f2-7c4-m1c ss e3f2-7c4-m1-s pnp plastic e3f2-7b4-p1 npb e3f2-7b4-m1-c ss e3f2-7b4-m1-s diffuse npn 10 cm npb e3f2-ds10c4-m1-c ss e3f2-ds10c4-m1-s plastic e3f2-ds10c4-p1 30 cm plastic e3f2-ds30c4-p1 note: npb = nickel plated brass; ss = stainless steel (this table continues on the next page.)
e3f2 e3f2 2 ordering information table continued from previous page supply type connection output range housing part number dc diffuse connector pnp 10 cm npb e3f2-ds10b4-m1-c ss e3f2-ds10b4-m1-s plastic e3f2-ds10b4-p1 30 cm plastic e3f2-ds30b4-p1 retroreflective, nlid npn 2 m plastic e3f2-r2c4-p1 , non-polarized pnp plastic e3f2-r2b4-p1 retroreflective, pl i d npn npb e3f2-r2rc4-m1-c , polarized ss e3f2-r2rc4-m1-s pnp npb e3f2-r2rb4-m1-c ss e3f2-r2rb4-m1-s through-beam pre-leaded npn 7 m plastic e3f2-7c4 g npb e3f2-7c4-c ss e3f2-7c4-s pnp 7 m plastic e3f2-7b4 npb e3f2-7b4-c ss e3f2-7b4-s diffuse npn 10 cm npb e3f2-ds10c4-c plastic e3f2-ds10c4-n ss e3f2-ds10c4s 30 cm plastic e3f2-ds30c4 pnp 10 cm npb e3f2-ds10b4-c plastic e3f2-ds10b4-n ss e3f2-ds10b4-s 30 cm plastic e3f2-ds30b4 retroreflective, nlid npn 2 m plastic e3f2-r2c4 , non-polarized pnp plastic e3f2-r2b4 retroreflective, pl i d npn 2 m npb e3f2-r2rc4-c , polarized ss e3f2-r2rc4-s pnp npb e3f2-r2rb4-c ss e3f2-r2rb4-s note: npb = nickel plated brass; ss = stainless steel accessories (order separately) description part number sensor mounting bracket y92e-b18 lens protector kit (glass plate, two gaskets and metal retainer) e39-f31 small corner cube reflector (38 h x 20 w x 11 d mm) e39-r3 adhesive backed reflector tape (10 h x 35 w x 0.7 d mm) e39-rsa adhesive backed reflector tape (35 h x 40 w x 0.7 d mm) e39-rsb mounting bracket for e39-r1 reflector e39-l7 right angle adapter for through-beam and retroreflective e3f2 sensors e39-ru1 connector cordsets connector type cable size length straight connector right angle connector 4-wire dc mi ch 22 awg 2 m (6.56 ft) y96e-44sd2 y96e-44rd2 micro change connector 5 m (16.40 ft) y96e-44sd5 y96e-44rd5 connec t or 10 m (32.8 ft) y96e-44sd10 y96e-44rd10 robotic cable with m12 t 2 m (6.56 ft) xs2f-d421-d80-r xs2f-d422-d80-r m12 connector 5 m (16.40 ft) xs2f-d421-g80-r xs2f-d422-g80-r
e3f2 e3f2 3 replacement parts description part number reflector for e3f2-r2 4 retroreflective sensors e39-r1 two plastic m18 mounting nuts e3f-phws specifications dc switching models part number e3f2-7c4- , e3f2-7b4- e3f2-r2c4- , e3f2-r2b4- e3f2-r2rc4- , e3f2-r2rb4- e3f2-ds10c4- , e3f2-ds10b4- e3f2-ds30c4- , e3f2-ds30b4- method of detection through-beam retroreflective diffuse g non-polarized polarized sensing range 7 m (22.96 ft) 2 m (6.56 ft) 2 m (6.56 ft) 10 cm (3.94 in) 30 cm (11.81 in) standard target 11 x 11 mm 56 x 56 mm 5 x 5 cm 90% kodak white card 10 x 10 cm 90% kodak white card supply voltage 10-30 vdc 10% maximum permissible ripple, peak-to-peak output npn or pnp open collector, 100 ma, residual voltage 2 v max. at 100 ma current consumption 45 ma max. 25 ma max. response time 2.5 ms max. stabilization on powerup 50 ms ambient temperature operating 25 c to 55 c (13 f to 131 f) with no icing storage 30 c to 70 c (22 f to 158 f) ambient light immunity incandescent: 3,000 x; sunlight: 10,000 x relative humidity operating 35% to 85% rh, no condensation y storage 35% to 95% rh insulation resistance 20 m w at 500 vdc dielectric strength 1,000 vac, 50/60 hz for 1 min. between current carrying parts and case vibration 10 to 55 hz 1.5 mm double amplitude 1 hr each in x, y, z axes shock 500 m/s 2 (approx. 50 g) enclosure ip67, nema 6 for metal versions; ip66 nema, 4 for plastic versions light source infrared led red led infrared led indicators power and light received leds sensitivity adjustment fixed adjustable operation mode light-on or dark-on selectable with control wire weight metal pre-leaded 100 g; connector: 60 g g plastic pre-leaded 85 g; connector: 40 g circuit protection output short-circuit and reverse polarity materials lens plastic housing plastic (abs), nickel plated brass, stainless steel plastic nickel plated brass, stainless steel plastic (abs), nickel plated brass, stainless steel cable sheath pvc
e3f2 e3f2 4 ac models part number e3f2-3z1, e3f2-3z2 e3f2-r2z1, e3f2-r2z2 e3f2-ds10z1n, e3f2-ds10z2n method of detection through-beam retroreflective diffuse sensing range 3 m (9.84 ft) 2 m (6.56 ft) 10 cm (3.94 in) standard target 11 mm 56 mm 10 x 10 cm 90% kodak white card supply voltage 24240 vac 10%, 50/60 hz output scr 200 ma max.; residual voltage 5 v max. at 200 ma power consumption 10 ma max. 5 ma max. response time 30 ms max. stabilization on powerup 100 ms ambient temperature operating 25 c to 55 c (13 f to 131 f) with no icing storage 30 c to 70 c (22 f to 158 f) ambient light immunity incandescent: 3,000 x; sunlight: 10,000 x relative humidity operating 35% to 85% rh, no condensation y storage 35% to 95% rh insulation resistance 20 m w at 500 vdc between current carrying parts and case dielectric strength 1,500 vac, 50/60 hz for 1 min. between current carrying parts and case vibration 10 to 55 hz 1.5 mm double amplitude 2 hrs each in x, y, z axes shock 500 m/s 2 (approx. 50 g) enclosure ip66, nema 1, 2, 4 (indoor) light source infrared led indicators power and light received leds sensitivity adjustment fixed operation mode light-on (z1 models) or dark-on (z2 models) weight pre-leaded models 110 g g connector models 55 g circuit protection e materials lens acrylate resin housing plastic abs cable sheath pvc
e3f2 e3f2 5 en g ineerin g data operating range (typical) e3f2-3 - (through-beam) e3f2-r2 - (retroreflective) operating position y (cm) x y x y distance x (m) distance x (m) operating position y (cm) distance x (m) e3f2-r2 and e39-ru1 (right angle adapter) 80 40 20 0 -20 -40 -60 -80 01 5 12 5 23 60 5 0 05 1 5 12 5 23 05 3445 150 100 50 0 -50 -100 -150 distance x (m) e3f2-3 and e39-ru1 (right angle adapter) e3f2-7 -4 (through-beam) e3f2-r2r -4 (polarized, retroreflective) operating position y (cm) distance x (m) operating position y (cm) distance x (m) 0 10 20 30 10 20 30 40 0 1 2 3 4 5 6 7 89 40 0 2 4 6 8 2 4 6 8 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 10 10
e3f2 e3f2 6 e3f2-ds30 - (diffuse) operating position y (cm) x y distance x (cm) e3f2-ds10 4-n e3f2-ds10 4-p1 operating position y (mm) distance x (mm) x y 15 10 5 0 5 10 15 0 20 40 60 80 100 120 white paper (5 x 5 cm) white paper (10 x 10 cm) excess gain vs. set distance (typical) e3f2-3 - (through-beam) excess gain ratio distance (m) dc type ac type e3f2-r2 - (retroflective, non-polarized) excess gain ratio distance (m) ac type dc type distance (m) e3f2-r2 and e39-ru1 (right angle adapter) 0.5 1 1.5 2 3 2.5 0 distance (m) e3f2-3 and e39-ru1 (right angle adapter) 3.5 20.0 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 1.0 0.0 ac type dc type ac type dc type 0 1234567 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 1.0 0.0
e3f2 e3f2 7 e3f2-7 4- (through beam) excess gain ratio distance (m) 100 1 0,1 10 0 2 4 6 8 10 12 14 e3f2-r2r 4- (polarized retroreflective) excess gain ratio distance (m) excess gain vs. set distance e3f2-ds10 4-n e3f2-ds10 4-p1 excess gain ratio excess gain ratio distance (mm) distance (mm) 0 20 40 60 80 100 120 0 20 40 60 80 100 120 sensing object (black paper: 5 x 5 cm) sensing object (white paper: 5 x 5 cm) sensing object (white paper: 5 x 5 cm) sensing object (black paper: 5 x 5 cm) e3f2-ds10z -n 9 8 7 6 5 4 3 2 1 25 5 10 0 15 30 20 0 excess gain ratio distance (cm) e3f2-ds30 4 e3f2-ds30 4-p1 0 10 20 30 40 50 60 sensing object (white paper: 10 x 10 cm) sensing object (black paper: 10 x 10 cm) 0 10 20 30 40 50 45 35 25 15 5
e3f2 e3f2 8 o peration output circuits configuration model connection method output transistor output circuit npn pre-wired e3f2-7c4 e3f2-7c4-m e3f2-7c4-c e3f2-7c4-s e3f2-r2c4 e3f2-r2rc4-m e3f2-r2rc4-c e3f2-r2rc4-s e3f2-ds10c4-n e3f2-ds10c4-m e3f2-ds10c4-c e3f2 ds10c4 s connect the pink and brown wires or open the pink wire. on when light is incident. (light-on) load brown (1) (see note) 100 ma max. (control output) black (4) main circuit light indicator red (mode selec- tion) z d 10 to 30 vdc z d :v z = 36 v blue (3) pink (2) e3f2 ds10c4 c e3f2-ds10c4-s e3f2-ds30c4 e3f2-ds30c4-m e3f2-ds30c4-s connect the pink and blue wires. on when light is in- terrupted. (dark-on) 100 ma max. (control output) main circuit red blue black (4) load z d z d :v z = 36 v 10 to 30 vdc light indicator brown (1) (mode selec- tion) blue (see note) (3) pink (2) pnp pre-wired e3f2-7b4 e3f2-7b4-m e3f2-7b4-c e3f2-7b4-s e3f2-r2b4 e3f2-r2rb4-m e3f2-r2rb4-c e3f2-r2rb4-s e3f2-ds10b4-n e3f2-ds10b4-m e3f2 - ds10b4 - c connect the pink and brown wires or open the pink wire. on when light is incident. (light-on) main circuit light indicator red 100 ma max. (control output) blue black load z d brown (1) (see note) (mode selection) z d :v z = 36 v 10 to 30 vdc (4) (3) pink (2) e3f2 - ds10b4 - c e3f2-ds10b4-s e3f2-ds30b4 e3f2-ds30b4-m e3f2-ds30b4-s connect the pink and blue wires. on when light is in- terrupted. (dark-on) (mode selection) 100 ma max. (control output) blue black load z d main circuit light indicator red brown (1) (see note) 10 to 30 vdc z d :v z = 36 v pink (4) (3) (2) npn connector E3F2-7C4-P1 e3f2-7c4-m1-m e3f2-7c4-m1-c e3f2-7c4-m1-s e3f2-r2c4-p1 e3f2-r2rc4-m1 -m e3f2-r2rc4-m1 -c e3f2-r2rc4-m1 -s e3f2-ds10c4- p1 connect the pink and brown wires or open the pink wire. on when light is incident. (light-on) load brown (1) (see note) 100 ma max. (control output) black (4) main circuit light indicator red (mode selec- tion) z d 10 to 30 vdc z d :v z = 36 v pink (2) blue (3) p1 e3f2-ds10c4- m1-m e3f2-ds10c4- m1-c e3f2-ds10c4- m1-s e3f2-ds30c4- p1 e3f2-ds30c4- m1-m e3f2-ds30c4- m1-s connect the pink and blue wires. on when light is in- terrupted. (dark-on) 100 ma max. (control output) main circuit red blue black (4) load z d z d :v z = 36 v 10 to 30 vdc light indicator brown (1) (mode selec- tion) pink (2) blue (see note) (3) note: terminal numbers are for connector types. (this table continues on the next page.)
e3f2 e3f2 9 operation table continued from previous page configuration model connection method output transistor output circuit pnp connector e3f2-7b4-p1 e3f2-7b4-m1-m e3f2-7b4-m1-c e3f2-7b4-m1-s e3f2-r2b4-p1 e3f2-r2rb4-m1 -m e3f2-r2rb4-m1 -c e3f2-r2rb4-m1 -s e3f2-ds10b4- p1 connect the pink and brown wires or open the pink wire. on when light is incident. (light-on) main circuit light indicator red 100 ma max. (control output) blue black load z d brown (1) (see note.) (mode selection) z d :v z = 36 v 10 to 30 vdc (4) (3) pink (2) p1 e3f2-ds10b4- m1-m e3f2-ds10b4- m1-c e3f2-ds10b4- m1-s e3f2-ds30b4- p1 e3f2-ds30b4- m1-m e3f2-ds30b4- m1-s connect the pink and blue wires. on when light is in- terrupted. (dark-on) (mode selection) 100 ma max. (control output) blue black load z d main circuit light indicator red brown (1) (see note.) 10 to 30 vdc z d :v z = 36 v pink (4) (3) (2) ac switching e3f2-3z1 e3f2-r2z1 e3f2-ds10z1-n --- (fixed) on when light is incident. (light-on) main load light indicator brown e3f2-3z2 e3f2-r2z2 e3f2-ds10z2-n on when light is in- terrupted. (dark-on) 200 ma max. (control output) main circuit red blue black 24 to 240 vac blue note: terminal numbers are for connector types. timing chart light-on mode dark-on mode light indicator (red) control output load (relay) on off on off operate release light indicator (red) control output load (relay) on off on off operate release incident interrupted incident interrupted terminals/connections 1 2 3 4 output 0 v vcc mode selector
e3f2 e3f2 10 dimensions unit: mm (inch) pre-leaded dc models emitter (or receiver on through-beam) 16.8 dia. diffuse and retroreflective (dc) polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 4-conductor (brown, blue, black, and pink) standard length: 2 m m18 x 1 5 dia. receiver sensitivity adjuster on ds 30 diffuse models only light indicator 65 (2.56) 42.3 (1.67) 37 (1.46) 49.3 (1.94) 6.2 (0.24) 22 (0.87) 8 (0.31) 24 (0.94) 3.1 (0.12) through-beam (dc) emitter: polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 2-conductor (brown and blue) standard length: 2 m receiver: polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 4-conductor (brown, blue, black, and pink) standard length: 2 m e3f2-7 4- e3f2-ds10 4- e3f2-ds30 4 e3f2-r2 4 e3f2-r2r 4- e3f2-7l-p1 e3f2-7d-p1 E3F2-7C4-P1, -m1- e3f2-ds10 4-p1, -m1 e3f2-ds30 4-p1, -m1 e3f2-r2 -p1 e3f2-r2r -m1- optical axis lens light indicator nameplate 10.5 dia. 16.8 dia. connector dc models sensitivity adjuster on ds 30 diffuse models only 5 dia. 6 dia. m12 x 1 m18 x 1 16.8 8.2 12.4 (0.49) 6.2 22 (0.87) 5 8 4 42.3 (1.67) 37 (1.46) 49.3 (1.94) a b 24 (0.94) metal body plastic body e3f2-ds - 1 e3f2-ds30 4-p1 a 76 (2.99) 73 (2.87) b 65.5 (2.58) 61.7 (2.43)
e3f2 e3f2 11 ac models e3f2-3z1, e3f2-3z2 e3f2-r2z1, e3f2-r2z2 e3f2-ds10z1-n, e3f2-ds10z2-n 24 (0.95) 90 (3.54) 67.3 (2.65) 62 (2.44) m18 x 1 5 8 4 light indicator 5 dia. diffuse and retroreflective (ac) vinyl insulated round cord, 4-mm dia. (11/0.16), 3-conductor (brown, blue, and black) standard length: 2 m 16.8 dia. receiver emitter 22 (0.87) 6.2 (0.24) 3.1 (0.12) through-beam (ac) emitter: polyvinyl chloride-covered cord, 4-mm dia. (11/0.16), 2-conductor (brown and blue) standard length: 2 m receiver: polyvinyl chloride-covered cord, 4-mm dia. (11/0.16), 3-conductor (brown, blue, and black) standard length: 2 m accessories e39-r1 reflector (included with retroreflective units) e39-l7 reflector adapter (order separately) 7.5 (0.30) 2.7 (0.11) 34 (1.34) 7 (0.28) 1.6 (0.06) 52 (2.05) 59.9 (2.36) 8 (0.31) 39.3 (1.55) 34 (1.34) 52 (2.05) 59 (2.32) 2-m3 nut (m5) 12 (0.47) m5 spring washer (m5) 2-3.5 (0.14) dia. e39-r3 reflector (order separately) 34.8 (1.37) two, m3 adhesive side two, m3 34 (1.34) r25.4 two, 3.2 dia. 14 13.7 r20 4.5 (0.18) 3.4 mounting bracket for e39-r3 (included with e39-r3) 11 (0.43) 0.2 (0.008) 38 (1.50) 1.2 (0.05) 2.6 (0.10) 19.3 (0.76) 29 (1.14) 25.4 0.1 3.4 (0.14) 28 (1.10) 22.9 (0.90) 11 16 (0.63) 20 (0.79) 0.2 1.2 1.2 (0.05) 38 (1.50) 20 (0.79) 7 0.2 10.1 41.8 (1.65) 25.4 (1.00) 34 (1.34) 10 18.45
e3f2 e3f2 12 e39-rsa reflector e39-rsb reflector 35 (1.38) 33 (1.30) 8 0.7 (0.03) four, r1 adhesive tape reflecting surface 0.7 (0.03) four, r1 33 (1.30) 40 (1.57) 38 (1.50) adhesive tape reflecting surface 35 (1.38) 10 (0.39) 16.0 (0.63) 15.7 (0.62) 6.1 (0.24) 9.2 (0.36) 5-40 sus set screw 45 x0.5 all around m18x1 internal threads 22.0 (0.87) 45 3.0 (0.12) 3.3 (0.13) 18.5 (0.73) 8.9 (0.35) 6x2 mm 30 typ. 10.6 (0.42) 4.0 (0.16) 23.9 (0.94) 20.5 (0.81) 28.7 (1.13) 14.1 (0.56) 24.6 (0.97) e39-ru1 right angle adapter mounting e39-ru1 do not exceed a torque value of 20 kg cm (2.0 n m, 17.4 in lbs) when tightening the adapter onto the sensor. use a 1/16o (1.5 mm) hex key on the set screw to secure the adapter to the e3f2. do not exceed a torque of 3.5 kg cm (0.35 n m, 3.0 in lbs). when set properly, the set screw will still extend beyond the adapter wall. make sure to loosen the set screw before rem oving the adapter from the sensor.
e3f2 e3f2 13 y92e-b18 mounting bracket e39-f31 lens cap note: hexagonal nut: m5 x 32 material: plastic 32 0.2 (1.26 0.008) 17 (0.67) max. 7 (0.28) 30 (1.18) 47 (1.85) max. 20 (0.79) dia. 4 (0.16) max. metal rim gasket e3f2 glass plate 18 (0.71) dia. optional connector cables viewed from pinside of connector straight connector cable terminals/connections connector cable brown pin 1 vdc black pin 4 output blue pin 3 0v note: water tightness with connector is only valid when authorized connections are used. cordset wire colors are shown in parentheses. assembly directions insert the m12 threaded end of the sensor into socket of connector so that the notch correctly aligns the pins. tighten the coupling nut by hand, not using a tool, until all the threads on the rear of the sensor are covered. this assures a posi- tive connection, important for instal- lations with vibration. right angle connector cable 22 awg, pvc jacketed cable rated for 300 v, 90 c: 2 m (6.56 ft) length for y96e-44sd2 5 m (16.40 ft) length for y96e-44sd5 10 m (32.81 ft) length for y96e-44sd10 22 awg, pvc jacketed cable rated for 300 v, 90 c: 2 m (6.56 ft) length for y96e-44rd2 5 m (16.40 ft) length for y96e-44rd5 10 m (32.81 ft) length for y96e-44rd10 silver-plated copper contacts aluminum coupling nut 14.67 (0.58) 26.65 (1.05) note: cable may be extended to a maximum of 200 m (656 ft.) 14.67 (0.58) 34.92 (1.37) silver-plated copper contacts aluminum coupling nut pink (white) pin 2 mode selection 1 2 3 4 1 3 max. 100 ma 1030 vdc to light-on to dark-on pin configuration npn 1 2 3 4 1 3 max. 100 ma 1030 vdc to light-on to dark-on pin configuration pnp y96e-44sd y96e-44rd viewed from pinside of connector 0 0
e3f2 e3f2 precautions if the input/output lines of the photoelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photoelectric sensor could be induced to malfunction, or even be damaged, by electrical noise. separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. do not subject the photoelectric sensor to excessive shock when mounting, in keeping with iec60529 ip66 standards. do not connect the black wire to the brown wire without a load. direct connection of these wires may damage the photoelectric sensor (ac switching type). black brown blue load sensor 24 to 240 vac warning the e3f2 photoelectric sensor is not a safety component for ensuring the safety of people which is defined in ec directive (91/368/eec) and covered by separate european standards or by any other regulations or standards. when using the photoelectric sensor in the vicinity of an inverter motor, be sure to connect the ground wire of the motor to earth. failure to ground the motor may result in malfunction of the sensor. when using the photoelectric sensor at temperatures over 45 c, the load current must be within the rated value shown in the figure below. operating temperature ( c) 200 130 5545 0 load current (ma) mounting do not exceed a torque of ? 2.0 n m {20 kgf cm} 17.7 in lb when tightening mounting nuts for plastic models. ? 20.0 n m {200 kgf cm} 177 in lb when tightening mounting nuts for metal models. cat. no. cedsax3 10/99 specifications subject to change without notice. printed in u.s.a. omron electronics, inc. one east commerce drive schaumburg, il 60173 note: dimensions shown are in millimeters. to convert millimeters to inches divide by 25.4. 1-800-55-omron omron canada, inc. 885 milner avenue scarborough, ontario m1b 5v8 416-286-6465 !

▲Up To Search▲

Price & Availability of E3F2-7C4-P1

	To Download E3F2-7C4-P1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .